Ford Engine Overhaul Manual Haynes & How To Build Big-Inch Ford Small Blocks 2 Book Set

Every Haynes manual is written specifically for the do-it-yourselfer from "hands-on" experience based on a vehicle teardown using commonly available tools. Step-by-step procedures are linked to hundreds of easy-to-follow photos and illustrations.
 
The manual includes a troubleshooting section to help identify specific problems, valuable short cuts to make the job easier and eliminate the need for special tools and an easy-to-use index.

This Ford Engine Overhaul Manual offers complete step-by-step, illustrated instructions for rebuilding the most popular Ford engines. Includes the 255, 260, 289, 302, 351C, 351M, 351W, 360, 390, 400, 428, 429 and 460 cubic inch engines.

Have you been dreaming about a little extra displacement for your Ford?

By increasing the bore and stroke of your current engine, you can add those cubic inches without the hassle of switching to a big block. George Reid thoroughly explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole. With this information, you'll be better able to tailor your heads, cam, intake manifold, carburetor, and exhaust system to get the most out of the extra cubes. Also included is a complete guide to factory head and block castings, as well as aftermarket block and head guides, so you can choose exactly the right parts for your project. This book is the definitive guide for building a big-inch Ford small block, complete with four engine buildups ranging from 331 to 408 cubic inches.